Rope Wrench PPE Regulations Kit_XstaticKT282A1-A1-xSTATIC

The ISC Rope Wrench has become a well established, popular tool within the production climbing industry and in tree cimbing competitions.

The Rope Wrench provides an 'S' bend in the rope above the hitch cord.  This effectively provides a contained double rope system, on a single rope, which shares the user's weight between the Wrench and the hitch.  This allows the operation of the hitch, without the need for a double-rope system. The Rope Wrench allows easy horizontally movement, with greatly reduced friction on re-directs (compared with DdRT).

The Rope Wrench system has been third-party tested and certified by a Notified Body, to PPE ‘Regulation 2016/425', allowing users to climb in compliance with the latest European best practice regulations.   

IMPORTANT, PLEASE NOTE:

The PPE Regulations Certification applies to full kits, when used in their entirety.

KT282A-A1-xStatic Kit Contents:
[1] Rope Wrench, fitted with Twin-leg Tether
[1] PHLOTICH Hitch-minding Pulley (Bushed)
[1] Aluminium HMS Karabiner (Supersafe Triple-lock Gate[1] Teufelberger OP 85cm e2e Hitch (10mm)
PLEASE NOTE:  For compliance labelling reasons, Hitch Cords must be sourced from ISC (via your ISC Retailer).   Hitch cords which are purchased through the Teufelberger supply network do not bear the required labelling, for compliance with the Rope Wrench PPE Regulation Approved kits.

[Length of] Teufelberger Xstatic, 11.7mm
Sewn termination only. Range of lengths available.
    

Spare Parts

Hardware, rope assemblies and cordage components are also available to purchase separately, in order to allow the supply of spare/replacement parts.

Colours

The standard hardware colour is red.  Other colours (purple, orange, gold, grey and black) are available by special order. 

 

Industries

Technical Information

Rope diameter range (mm)11.7
Serial numberingAs standard
EZYiDAvailable on request
Gate/lock typeSupersafe
Body finishAnodised

Approved Standards

CE PPE Regulation 2016/425.

In order to be compliant, the prescribed kit MUST be used in its entirety and with the hitch cord tied in a 5-wrap Distel configuration.

Notes

The standard hardware colour is Red, with other colours (purple, orange, gold, grey and black) available as special order items. The standard kit is supplied with a PHOLTICH hitch-minding pulley, fitted with Bushing. Bearing version is available on request.