D2 Escape DescenderRP860

D2 Escape Descender

The D2TM Escape Descender is an innovative ‘double-stop’Descender. The ‘double-stop’ function means that the D2 Descender has a sweet spot in which the descent speed can easily be controlled. Either side of the sweet spot, there is an auto-lock function - when the user lets go of the handle the device automatically stops and when the user pulls the handle too hard the device automatically stops, (often referred to as a ‘panic-stop’).

The handle-operated cam means that in a panic situation, the Descender would actually stop the descent, (rather than just slow down). 

The D2 can be controlled by pushing in the cam (ideally using the thumb), which allows the user to smoothly feed the rope through the device, without the use of the handle. The cam feed feature is particularly useful in bail-out Operations. It is also easy to back-feed the rope through the D2 and therefore it can be used for smooth ascending or for emergency hauling, (when used as part of a 2:1 ‘Z-rig’). The Descender is compact and lightweight, allowing it to be carried on the harness at all times.

The RP860 D2 Kit can be supplied with 8mm PER Nylon rope, or 100% Technora Aramid Heat-Resistant Rope (498°C 930°F), for use in applications where the kit is exposed to extremely high temperatures.


Industrial Height Safety Rope Access

Technical Information

Compatible with rope diameter (mm)8mm
Panic brakeYes
Number of persons1
(WLL) Working Load Limit (kg)100
(WLL) Working Load Limit (lbs)220
Serial numberingAs standard
EZYiDAvailable on request
Cam materialStainless Steel

Approved Standards

NFPA Compliant


Maximum Decent Length: 120m

Printed from www.iscwales.com on 22/06/2021 06:11:06.

International Safety Components Ltd., Unit 1, Plot 2, Llandygai Industrial Estate, Bangor, Gwynedd, LL57 4YH, United Kingdom

Tel: +44 (0) 1248 363 110
Email: [email protected]