A-Frame Deadweight AnchorDW200.2

NEW Certifications/conformity:
CE Marked to EN795:2012 (Type E):  The latest and most stringent EN Standard for Anchors.

PD CEN/TS 16415:  Advisory standard - Recommendations for use of anchor points by more than one person simultaneously (fully rated for two person rescue loads).

IRATA International Code of Practice (ICOP) Compliant: Meets the 15kN static load testing, making them the only ICOP compliant Deadweight Anchors available on the market.

Features & Applications:
Suitable for use on flat roof surface
(Only 300mm upstand required)

2180mm (7'1") High anchor points
Enables user to easily start their descent 

No damage to surfaces
Does not require penetration of roof membrane 

Built in shock absorber 

Unit can easily be moved sideways
Reducing the need for re-rigging 

Minimal assembly required

Click the video link below to see the A-Frame in action

Industries

Technical Information

Number of persons2
(SWL) Safe Working Load (kg)200
(SWL) Safe Working Load (lbs)440
Serial numberingAs standard
FinishPowder coated
ColourYellow
Weight (grams)396kg
Weight (ounces)873lb

Approved Standards

CE 0120 EN795:2012 TYPE E
PD CEN/TS 16415: Advisory standard - Recommendations for use of anchor points by more than one person simultaneously (fully rated for two person rescue loads).
IRATA International Code of Practice (ICOP) Compliant: Meets the 15kN static load testing, making them the only ICOP compliant Deadweight Anchors available on the market.

Notes

This product must be used against an up-stand (structural balustrade) of minimum 300mm (12"/1ft) height. The maximum height of the up-stand should not exceed 1500mm (59"/ 4.92ft).