Deadweight TrolleyDW100.3

The DW100.3 Deadweight Trolley has been designed for use with Olympic Weight Plates (supplied with 6 x 25kg Plates, as standard).  The device can also be purchased without weight plates, reducing shipping costs by allowing users to purchase weights locally.

Certifications/Conformity:
CE Marked to EN795:2012 (Type E):  The latest and most stringent EN Standard for Anchors.

PD CEN/TS 16415:  Advisory standard - Recommendations for use of anchor points by more than one person simultaneously (fully rated for two person rescue loads).

IRATA International Code of Practice (ICOP) Compliant: Meets the 15kN static load testing, making them the only ICOP compliant Deadweight Anchors available on the market. 

Features & Applications
Use behind Structural Handrails, Balustrades & Parapet walls
(Requires minimum 600mm upstand)

Ideal for confined working spaces
Requires working area of only 540mm x 540mm

Minimises rigging time
Unit can easily be moved sideways during use 

Static load tested
Relevant for two man rescue 

Quick, easy set up

No alteration to building aesthetics
Does not require penetration of roof membrane

Low maintenance 

Component parts weigh 25kg maximum
Conforms to manual handling regulations 

Cost effective & versatile
Great as an alternative to permanent anchor systems

Industries

Technical Information

Number of persons2
(SWL) Safe Working Load (kg)200
(SWL) Safe Working Load (lbs)440
Serial numberingAs standard
FinishPowder coated
ColourYellow
Weight (grams)31kg frame, plus 6 x 25kg weight plates
Weight (ounces)68lb frame, plus 6 x 55lb weight plates

Approved Standards

CE 0120 EN795:2012 TYPE E
PD CEN/TS 16415: Advisory standard - Recommendations for use of anchor points by more than one person simultaneously (fully rated for two person rescue loads).
IRATA International Code of Practice (ICOP) Compliant: Meets the 15kN static load testing, making them the only ICOP compliant Deadweight Anchors available on the market.

Notes

This product must be used against an up-stand (structural balustrade) of minimum 600mm (24"/2ft) height. The maximum height of the up-stand should not exceed 1200mm (47"/ 3.92ft).

Style/design of weight plate may vary from the weight plate shown.