RP282 Phlotich Hitch-minding Pulley

April 24th 2018

We're delighted to introduce our new Phlotich Hitch-minding Pulley, a new multi-aperture device specifically designed for SRT and DdRT Climbing systems.  The Phlotich is available in a range of colours, with a choice of Bushings or Bearings.

Phlotich Features & Benefits

Profiled side plates capture the host line, allowing for a reduction in host line movement

Sideplates mate perfectly parallel allowing for a 'clean' connection to the anchoring Karbiners.  The mated sideplates also allow for seamless use of a 'Twin Leg' Tether in SRT climbing with a Rope Wrench.  This reduces clutter and allows proper alignment of the hitch, pulley and tether on the anchoring Karabiner (in a Rope Wrench set up)

Dual Karabiner Alignment- when used with Doubled Rope Climbing, the Phlotich allows the two anchoring Karabiners to be aligned efficiently on one pulley, instead of separating to two separate anchors

Unique 'Kidney' aperture:
allows for a wide variety of Karabiner connector shapes  
allows for multiple Karabiner connections at one time
allows for a Karabiner to 'centre' itself depending on where the load is applied- and allows Karabiners to 'self centre' during climbing manoeuvers, which is helpful with DdRT climbing when climbing up to a 'large limb'
allows for a perfect spot to anchor a 'Sternal' anchoring device (Karabiner, hook, Chestie, etc.) for use in SRT climbing on ascent with a Rope Wrench.  This connector in the 'Kidney' aperture will self align to the most efficient spot and can be removed and attached easily
allow the efficient use of the Pulley as a 'trolley' and allows for self alignment of an anchoring Karabiner in the 'Kidney' aperture when used in this configuration.
The Phlotich can be used effectively for 'Double Crotching' or setting up efficient mechanical advantage systems due to the multiple attachment points and the ability for multiple Karabiners anchored in the 'Kidney' aperture.
For technical information, please see downloads below

Share this post

Share on Facebook Share on Twitter
 
Back to Blog

Printed from www.iscwales.com on 28/03/2024 19:53:02.

International Safety Components Ltd., Unit 1, Plot 2, Llandygai Industrial Estate, Bangor, Gwynedd, LL57 4YH, United Kingdom

Tel: +44 (0) 1248 363 110
Email: [email protected]