RP430 / RP430 ALF Climb Assist Pulley- 2 Way Auto Locking

Product information:

The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on thier way around a High Ropes/Challenge course.

The ALF is also a protection solution for workers on towers, masts, Wind Turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working.

In the event of a fall, the ALF Pulley locks on quickly to arrest the fall.  As fall distances are extremely small, it is extremely unlikely that the user will be incapacitated.  However if necessary, a resuce can be easily organised from ground level.

The ALF has been field trialled and cycle tested by over 4000 users with no detriment to performance and with little or no wear.  The Alf has been extensively drop tested, in line with both CE EN360 and ANSI Z359.  The unit has also been tested with weights other than those required for CE and ANSI Standards and has been statically pulled to destruction- making it probably the safest Climb Assist product in the world!

The unit can be rigged in a continuous loop system, using a Large Single Prussik Pulley (Aluminium) [Part Code RP066].

Industries

Product information:

The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on thier way around a High Ropes/Challenge course.

The ALF is also a protection solution for workers on towers, masts, Wind Turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working.

In the event of a fall, the ALF Pulley locks on quickly to arrest the fall.  As fall distances are extremely small, it is extremely unlikely that the user will be incapacitated.  However if necessary, a resuce can be easily organised from ground level.

The ALF has been field trialled and cycle tested by over 4000 users with no detriment to performance and with little or no wear.  The Alf has been extensively drop tested, in line with both CE EN360 and ANSI Z359.  The unit has also been tested with weights other than those required for CE and ANSI Standards and has been statically pulled to destruction- making it probably the safest Climb Assist product in the world!

The unit can be rigged in a continuous loop system, using a Large Single Prussik Pulley (Aluminium) [Part Code RP066].

Rope Access Industrial Height Safety Adventure Park
Compatible with rope diameter (mm)Approved 11mm EN1891-A Ropes Only
Number of persons1
FinishAnodised
ColourPurple
May be servicedYes
Weight (grams)1200
Weight (ounces)42.3
CE 0120 EN360
ANSI Z359

Service requirements:

Immediately before, during and after use make visual inspections of the product to ensure that it is in a serviceable condition and is operating correctly. In addition to the basic visual inspections conducted by the user, the product must be examined annually, or more frequently depending on local legislation or intensity of use. Servicing must be carried out by the manufacturer or a competent person authorised by the manufacturer. Other factors, such as, extreme temperatures, humidity, the effects of chemicals, rust, cuts, abrasions or the frequency of use could affect the required service interval of the equipment.

Notes

CE 0120 EN360
ANSI Z359

Service requirements:

Immediately before, during and after use make visual inspections of the product to ensure that it is in a serviceable condition and is operating correctly. In addition to the basic visual inspections conducted by the user, the product must be examined annually, or more frequently depending on local legislation or intensity of use. Servicing must be carried out by the manufacturer or a competent person authorised by the manufacturer. Other factors, such as, extreme temperatures, humidity, the effects of chemicals, rust, cuts, abrasions or the frequency of use could affect the required service interval of the equipment.

Printed from www.iscwales.com

19/04/2018 22:12:51

International Safety Components Ltd., Unit 1, Plot 2, Llandygai Industrial Estate, Bangor, Gwynedd, LL57 4YH, United Kingdom
Tel: +44 (0) 1248 363 110 | Fax: +44 (0) 1248 372 348 | Email: sales@iscwales.com